Cracked and sunken concrete or asphalt driveways, walks and aprons removed and the base graded for a fresh pour.
A cracked, heaved or settled driveway is more than an eyesore. It can pool water against the house, create trip hazards and signal drainage problems underneath. Replacing it starts with removing the old surface cleanly, and doing that well makes the new driveway last.
We mark the edges with you, protect the garage slab, curbs and landscaping you plan to keep and saw-cut where concrete meets concrete that stays. We break out the old surface, load and haul it and check the base underneath. If the stone base is wet, contaminated or uneven, we tell you, so the new driveway starts on solid ground.
A new surface is only as good as the base beneath it. We expose and assess the sub-base, and we grade and compact it to your contractor specification where requested.
Garage floors, curbs, aprons, mailboxes, lawns and tree roots are all close to a driveway. We saw-cut and hand-work edges where needed.
Concrete is broken out in slabs and asphalt is scraped and lifted. Each is recycled separately and hauled by weight.
Water should run away from the house. While the old driveway is out, it is the best time to correct low spots and slope.
Drag the handle to compare.
BeforeAfterConcrete and asphalt removed.
Saw cuts and hand work at curbs and slabs.
Sub-base assessed after removal.
Low spots flagged while it is open.
Concrete and asphalt sorted.
Ready for your contractor.
Every topic has its own page with what to expect and how we approach it.
Material guideConcreteThe heaviest thing on most demolition jobs. Here is how concrete is removed, how much it weighs and…Learn more 
Project situationPools and BackyardsPools, patios, decks, fences and sheds all come out eventually. Here is how to reclaim a backyard without…Learn more 
Project situationBuilder SitesBuilders need clean, graded, well-documented lots on a firm schedule. Here is how demolition and site work support…Learn more Enter the length, width and thickness to see cubic yards, tons and truckloads of concrete to remove.
You tell us about the project, the timeline and any concerns, and we set a time to visit that fits your day.
We walk the structure and the lot, check access, utilities and likely hazards and take photos and measurements.
We prepare the written scope, coordinate permits, surveys and utility disconnects and set up fencing and dust control.
The work proceeds in a planned order with water on dust and materials sorted for recycling.
Debris is loaded and hauled away on schedule, and the site is swept and kept tidy.
We grade the lot, sweep for nails and debris, take photos and walk the finished work with you.
Most residential driveways take a day, and larger ones take two.
Yes. We saw-cut along the line you choose and remove only the damaged portion.
We can rough grade and compact it, and your paving contractor does the final prep for the pour.
Heavy equipment can mark turf. We protect it where we can and tell you what to expect.
Yes. We load and haul it to a recycler.
Concrete Demolition and RemovalSlabs, footings, walls and pads broken out with hydraulic equipment, sorted for recycling and hauled away.Explore 
Asphalt and Parking Lot RemovalCracked asphalt, driveways and parking lots milled, scraped or broken out, recycled and hauled with the base graded.Explore 
Patio and Hardscape RemovalPaver, stone and concrete patios, walkways and steps lifted or broken out, with pavers saved for reuse when…Explore 
Lot Grading and Site PreparationCleared lots shaped to the right grade and slope, with drainage in mind and a stable pad ready…Explore Tell us about the project and we will call you back to talk it through.
Or call (615) 357-7797 to talk now.
